Filter
Top Products
117
Save/Load of Song data
<Hint>
When a CD-RW disc on which any data is recorded
is set, if you perform step 7 above (i.e. pressing the
[ENTER/YES] key when “CD-DA” is flashing), “Not
Empty!” appears on the display, followed by the
screen for selecting whether erasing recorded data
or ejecting the disc.
• If you erase recorded data:
Press the [ENTER/YES] key while “ERASE” and
“Sure?” are flashing.
After the key press, the display changes as follows
and the VF80 starts erasing the data.
As the erasing process is going on, the number of
flashing “ * ” increases.
When erasing is completed, the display shows the
same screen which appears when pressing the [EN-
TER/YES] key after selecting “CD-DA” on step 7 above.
So follow the same procedure from step 8 on page
116.
Increases as the process progresses.
• If you eject the disc:
Use the [JOG] dial to make “Eject” flashing and then
press the [ENTER/YES] key.
The disc is ejected, while “Insert Disk!” appears on
the screen.
When inserting a blank disc, you can go on the next
step (see the procedure described above).
When the recording ends, “Save Completed!” appears
on the screen, while the disc is automatically ejected
from the CD-RW drive.
When completed, press the [EXIT/NO] key to quit the
Setup mode.
Flashing
Flashing
Flashing
Flashing
After specifying the program(s), press the [ENTER/
YES] key while holding down the [RECORD] key.
The VF80 starts recording to the disc, while the dis-
play shows the following screen.
<Note>
When making an audio CD, if you select a program
which consumes more disc space than the record-
able space of a CD-RW/CD-R disc,
“Disk Full!”
ap-
pears on the display and you cannot select the pro-
gram.
<Notes for selecting more than one program>
When recording more than one program to a CD-
RW/CD-R disc, do not skip any track when assign-
ing programs to tracks.
If you skip any track, you cannot record data to the
subsequent tracks. In the following example, track
03 is skipped when assigning programs.
So only tracks 01 and 02 will be recorded. Tracks
03 and subsequent tracks can not be recorded.
10
11