Filter
Top Products
62
Recorder Functions
P01
P02
P03 P04
P05
P01
P02
P03 P04
P03 is deleted.
1
3
4
1
2
1
2
Selecting a program
When more than one program exists on the disk, you
have to select the desired program before starting
operations for recording, playback or editing.
Select the desired program by following the procedure
below while the recorder is stopped and the display
shows the Normal screen.
Press the [TRACK EDIT/
PGM] key while holding down
the [SHIFT] key.
The screen for selecting, renaming or deleting a program
appears. In the screen, all existing program numbers
and titles are shown.
Use the [JOG] dial to highlight the desired program and
then press the [SETUP/
F1] key while holding down the
[SHIFT] key.
Deleting a program
You can delete an unnecessary program individually.
To make recording or editing, a certain amount of disk
space is needed. By deleting unnecessary programs,
the available disk space increases.
<Notes>
• When only one program (P01) exists, if you try to
delete the program, the data in the program is deleted
but P01 remains.
• For example, when five programs (P01 through P05)
exist, if you delete P03, it looks like P05 is deleted. This
is because the program numbers higher than 03 move
down. In other words, P04 and P05 become P03 and
P04 respectively.
Note that you cannot undo or redo deleting the program.
Press the [TRACK EDIT/PGM] key while holding down
the [SHIFT] key.
The screen for selecting, renaming or deleting a program
appears. In the screen, all existing program numbers
and titles are shown.
Use the [JOG] dial to highlight the program to be de-
leted and then press the [UNDO/REDO/
F3] key while
holding down the [SHIFT] key.
The screen shows "Delete! Sure?", asking you confirm.
<Hint>
You may use the [CURSOR ] to highlight "DELETE" and
press the [ENTER/YES] key to bring up the screen
above, instead of pressing the [UNDO/REDO/F3] key
while holding down the [SHIFT] key.
Press the [ENTER/YES] key while holding down the
[RECORD] key.
The selected (highlighted) program is deleted, and the
following programs in the list move up.
Press the [EXIT/NO] key to switch to the Normal screen.
The previous program of the deleted program is se-
lected.
Editing a program title
You can edit a program title anytime by following the
procedure below.
Note that you can also enter a program title in the
process of creating a new program as mentioned ear-
lier.
Press the [TRACK EDIT/
PGM] key while holding down
the [SHIFT] key.
The screen for selecting, renaming or deleting a program
appears. In the screen, all existing program numbers
and titles are shown.