Filter
Top Products
Reference [Rhythm]
ZOOM MRS-1266
106
5.
To enter a note, hit the pad corresponding to the
note, and then press the [STEP] key.
The note is recorded, and the unit advances by one step,
corresponding to the quantize value set in step 4. You can
also use the [BANK/OCTAVE] key to select a different pad
bank before hitting a pad.
HINT
• The intensity with which you hit the pad is also recorded
on the drum track.
• If you hit several pads during input, multiple sounds will be
recorded at the same position.
• Instead of tapping the pads, you can also input sounds by
using a MIDI controller connected to the MRS-1266’s MIDI
IN connector.
6.
To enter a rest, press only the [STEP] key.
If you press the [STEP] key by itself, the position advances by
one step (duration of quantize value) but no play information
is recorded.
7.
Repeat steps 5 - 6 while changing the step length
as necessary, to enter the desired rhythm pattern.
When you reach the end of the pattern, the unit automatically
returns to the first measure, letting you enter more instrument
sounds.
8.
To edit the drum track after step input, proceed as
follows.
■
To erase the performance of a specific pad
When you advance the record position with the [STEP] key,
the pad that is input at the current position lights up. By
holding down the [DELETE/ERASE] key and pressing the
lit pad, you can erase the sound of that pad. The pad goes out,
and the playing information is erased from the rhythm
pattern.
NOTE
When searching for a note to erase, set the quantize value to
the same value as the smallest value used during recording,
or to a smaller value.
9.
When you have finished step input, press the STOP
[
P
] key.
The unit returns to the rhythm pattern screen. Press the
PLAY [
R] key to hear the pattern that you recorded.
10.
To terminate pattern recording and return to the
main screen, press the [EXIT] key.
Q=4
Q=4
0
0
001- 2
001- 2
Q=4
Q=4
0
0
001- 3
001- 3