Filter
Top Products
Reference [Creating a CD]
ZOOM MRS-1266
132
6.
Turn the dial to select the project to be used as
track 1 of the album.
The indication “END OF PROJ” moves up to the next track,
and the screen changes as follows.
(1) Project number
(2) Project name
This shows the name and number of the project to be used as
recording source.
(3) Track number
This shows the track number to be used as write target on the
CD-R/RW disc.
(4) V-take duration
This shows the length of the currently selected V-take of the
master track in the above project.
NOTE
Only projects with a master track for which a recorded V-take
is selected are shown. If a desired project name does not
come up, check whether a recorded V-take was selected for
its master track.
7.
When the project for track 1 has been selected, use
the cursor right key to move to track 2.
The screen changes as follows.
8.
Turn the dial to select the project to be used as
track 2 of the album.
9.
In the same way, select projects for track 3 and
subsequent tracks.
The maximum allowable number of tracks is 99, provided
that there is enough free capacity on the disc.
■
To audition the master track
Press the PLAY [R] key. The master track of the project
currently shown on the display is played. To stop playback,
press the STOP [
P] key.
■
To change projects in an album
Use the cursor left/right keys to select the track number for
which you want to change the project and use the dial to
select another project.
■
To delete a project from an album
Use the cursor left/right keys to select the track number
whose project you want to delete and press the [EDIT] key.
The indication “DELETE SURE?” appears on the display.
To delete the project from the album list, press the [ENTER]
key. If you wish to cancel the process, press the [EXIT] key
instead. When a project is deleted, the following tracks are
moved up by one position.
■
To delete all projects from an album
Assembling an album, press the [EDIT] key and then the
cursor down key. The indication “ALL DEL SURE?”
appears on the display. To delete all projects from the album
list, press the [ENTER] key. If you wish to cancel the
process, press the [EXIT] key instead.
■
To check the capacity of the disc
Press the cursor down key. The remaining time of the disc
appears in the lower part of the display. To return to the
previous screen, press the cursor up key.
END OF
END OF
PROJ
PROJ
01
01
00000 00
PRJ 001
PRJ 001
PRJ001
PRJ001
01
01
04361
1
20
(1) Project number
(2) Project name (4) V-take duration (3) Track number
02
02
END OF
END OF
PROJ
PROJ
Track01
Proj001
Track02
Proj015
Track03
Proj003
Track05
Proj023
END OF
Proj
Track01
Proj001
Track02
Proj015
Track05
Proj023
END OF
Proj
DELETE