Filter
Top Products
Reference [Creating a CD]
ZOOM MRS-1266
131
HINT
By pressing the [EXIT] key instead of the [ENTER] key, you
can cancel the write process and return to the previous dis-
play screen.
11.
When writing is complete, press the [EXIT] key.
The unit returns to the condition of step 4. To add more audio
data, load the next project and repeat the above procedure.
NOTE
• When using this method, a blank gap of 2 seconds will
automatically be inserted between tracks on the disc.
• As long as the finalizing operation has not been performed,
the CD-R/RW disc cannot be played on an ordinary CD
player. (For information on how to audition an unfinalized
CD-R/RW disc, refer to page 133.)
12.
To return to the main screen, press the [EXIT] key .
Recording audio data by album
This method involves creating a list for the audio CD (called
an “album”) which contains information about master tracks
from multiple projects saved on the hard disk. The CD-R/
CD-RW disc is then written in a single operation.
NOTE
Before starting the procedure described below, use the
trimming function on the master track to make sure that it
does not include unwanted blank portions at the beginning
and end.
1.
Insert a CD-R/RW disc into the CD-R/RW drive.
To newly write audio data, use a blank CD-R/RW disc or a
CD-RW disc that has been completely erased.
To add audio data, use a CD-R/RW disc that has not yet been
finalized.
2.
Verify that the correct V-takes are selected for the
master tracks of the projects to be recorded.
NOTE
Projects in which an unrecorded V-take is selected for the
master track cannot be used as source material.
3.
From the main screen, press the [AUDIO] key in the
control section.
The audio CD menu appears.
4.
Use the cursor left/right keys to bring up the
indication “AUDIO CD ALBUM” on the display.
5.
Press the [ENTER] key.
In this condition, you can register projects for the album. The
indication “END OF PROJ” denotes the end of the album list
of projects. When the album display is first called up, no
project has been registered, therefore the indication “END
OF PROJ” appears.
AUDIO CD
AUDIO CD
ALBUM
ALBUM