Zoom MRS-1266 Musical Instrument User Manual


 
Appendix
ZOOM MRS-1266
160
MRS-1266 specifications
Recorder
Number of physical tracks 12
Number of virtual tracks 120 (10 V-takes per track)
Drum track 1 (stereo)
Bass track 1 (mono)
Number of simultaneous recording tracks
6
Recording data format
16-bit linear (non-compressed)
Maximum recording time
Approx. 3 hours/gigabyte (referred to mono tracks)
Marker function 100 mark points per project
Location indication
Hour/Min/Sec/mSec/Meas/Beat/Tick display
Track edit functions
Copy, move, paste, erase, exchange, trim, fade-in/out,
reverse, time stretch/compression
Punch-in/out function Manual, auto
Other functions
Bounce, scrub/preview, A-B repeat, capture/swap, phrase
loop
Mixer
Number of simultaneous playback tracks
13 (10 audio tracks + stereo drum track + mono bass
track)
Faders
12 (1-8 mono, 9/10 stereo, drum, bass, stereo master)
Level meter indication
Post fader/pre fader (selectable), fader value monitor
function
Track parameters
Equalizer, effect send, panning (balance for stereo-linked
tracks)
Equalizer
HIGH (f: 500 Hz - 18 kHz, gain: ±12 dB)
LOW (f: 40 Hz - 1.6 kHz, gain: ±12 dB)
Effect send Chorus/delay send, reverb send
Stereo linking
Tracks 1/2, 3/4, 5/6, 7/8, selectable; tracks 9/10 (fixed)
Scene function
100 scenes per project (assigning to marks possible)
Effects
Algorithms
5 types (dual, guitar/bass, mic, line, mastering)
Modeling principle
VAMS (Variable Architecture Modeling System)
Number of patches
280 (dual 50 + guitar/bass 100 + mic 50 + line 50 +
mastering 30)
Number of effect modules
4 (compressor, preamp/drive, equalizer, modulation/
delay)
Number of send/return modules
2 (chorus/delay, reverb)
Number of send/return patches
40 (chorus/delay 20 + reverb 20)
Tuner principle Chromatic auto tuner
Tuner calibration
435 - 445 Hz, adjustable in 1-Hz steps
Rhythm section
Number of voices 30 (drum + bass)
Sound source principle 16-bit linear PCM
Drum kits 127
Drum sound sources
36 per drum kit (12 pads x 3 banks)
Bass sound sources 26 (5 octaves each)
Number of pads 12 (with velocity sensing)
Resolution 48 PPQN
Beat range 1/4 - 8/4
Number of factory preset patterns
over 400 (rewritable)
Maximum number of patterns
511 per song (rewritable)
Maximum number of measures
999 (per rhythm song), 99 (per rhythm pattern)
Number of notes
approx. 20,000 (per rhythm song)
Tempo range 40.0 - 250.0
Hard disk 3.5 inch E-IDE type
Maximum number of projects
1000
A/D converter 24-bit, 64-times oversampling
D/A converter 24-bit, 8-times oversampling
Sampling frequency 44.1 kHz
Signal processing 24-bit
Frequency response
20 Hz - 20 kHz ±1 dB (10-kilohm load)
S/N ratio 93 dB (IHF-A)
Dynamic range 97 dB (IHF-A)
THD + noise
0.02% (400 Hz, 10-kilohm load)
Display
96 x 63 mm, custom LCD (with backlight)
Guitar/bass (Hi-Z) input
2 x standard mono phone jack, input impedance 500
kilohms
Unbalanced inputs
6 x standard mono phone jack, input impedance 50
kilohms or more, unbalanced
Balanced inputs
2 x XLR-3-31 type, input impedance 1 kilohm balanced,
pin 2 hot
Phantom power supply
48 V (with on/off switch)
Input level
-50 dBm to +4 dBm (continuously variable)
Master output
RCA type phono jacks (L/R)
Output impedance 1 kilohm
Rated output level -10 dBm
Headphone output
Standard stereo phone jack, 50 mW (into 32-ohm load)
Sub output
Standard stereo phone jack, 50 mW(into 32-ohm load)
Digital output
S/P DIF, optical (20-bit)
MIDI connectors IN, OUT
Control input FP02 connector, FS01 connector
Optional board slot 1
Dimensions 480 (W) x 310 (D) x 115 (H) mm
Weight
6.8 kg (with drive) / 5.8kg(without drive)
Power supply 12 V DC, 2.5 A
(from supplied AC adapter AD-0010)
Power consumption 30 W (12 V, 2A) typ.
Supplied accessories
Universal AC adapter (AD-0010), AC cable
Optional accessories FS01 (foot switch)
FP02 (expression pedal)
Option board UIB-01 (USB interface board)
0 dB = 0.775 Vrms
Design and specifications are subject to change without notice.
Appendix