Filter
Top Products
Appendix
ZOOM MRS-1266
171
RISE_1
RISE_2
DEPTH
FreqOFST
RATE
TYPE
RESO
EFX LVL
DRY LVL
RISE_1
DIMENSN An effect that produces spatial width.
DEPTH
RESONNC A resonance filter with LFO.
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5 PARAMETER 6
TYPE
DIMENSN
RESONNC
RISE_2
FreqOFST
--
RATE
--
TYPE
--
RESO
--
EFX LVL
PARAMETER 7
--
DRY LVL
DIMENSION/RESONANCE MODULE
*For an explanation of the parameters, refer to theDUAL algorithm.
You can use an expression pedal to control the volume.
PARAMETER 1
TYPE
VOL PDL
MIN VOL
0 – 30
0 – 30
0 – 10
1 – 30
1 – 30
HPF /LPF /bPF
1 – 30
0 – 30
0 – 30
Specifies the degree to which the stereo component is emphasized.
Specifies the spaciousness that includes the mono component.
Specifies the depth of the effect.
Specifies the LFO offset.
Specifies the speed of the effect.
Specifies the type of filter.
Adds character to the effect.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
Range Explanation of parameterParameter name
Explanation of DIMENSION/RESONANCE MODULE parameters
LFO TYPE
DEPTH
RATE
PRE DLY
EFX LVL
TIME
FB
DAMP
REV_SEND
TONE
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5
TYPE
CHORUS
DELAY
DOUBLE
DEPTH
FB
TONE
LFO TYPE
TIME
TIME
RATE
DAMP
EFX LVL
PRE DLY
EFX LVL
--
EFX LVL
REV_SEND
--
CHORUS/DELAY MODULE
PRE DLY
REV TIME
EQ_HIGH
EQ_LOW
E/R MIX
EFX LVL
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 PARAMETER 5 PARAMETER 6
TYPE
HALL
ROOM
REV TIME
REV TIME
EQ_HIGH
EQ_HIGH
EQ_LOW
EQ_LOW
E/R MIX
E/R MIX
EFX LVL
EFX LVL
REVERB MODULE
A stereo chorus that produces clear sound and a wonderfully spacious feeling.
A delay effect of up to 1000 mSec.
A doubling effect of up to 100 mSec.
Mn /St
0 – 10
1 – 30
1 – 30
0 – 30
TYPE=DELAY:1 – 1000
TYPE=DOUBLE:1 – 100
0 – 10
0 – 10
0 – 30
0 – 10
Selects the LFO phrase; Mn (mono) or St (stereo).
Sets the depth of the effect.
Sets the speed of the effect.
Sets the pre-delay time.
Adjusts the mix amount of the effect sound.
Sets the delay time. (TIME= setting value x 1msec)
Adjusts the amount of feedback.
Sets the amount of high-frequency decay for the delay sound.
Sets the amount of delay sound that is sent to reverb.
Adjusts the tone.
Range Explanation of parameterParameter name
Explanation of CHORUS/DELAY MODULE parameters
1 – 100
1 – 30
-12 – 6
-12 – 6
0 – 30
0 – 30
Specifies the pre-delay time.
Specifies the reverb time.
Specifies the high-frequency volume of the reverb sound.
Specifies the low-frequency volume of the reverb sound.
Specifies the volume of early reflections.
Adjusts the mix amount of the effect sound.
Range Explanation of parameterParameter name
Explanation of REVERB MODULE parameters
A reverb effect that produces the reverberation characteristic of a concert hall.
A reverb effect that simulates the reverberation of a room.
PRE DLY
PRE DLY
Send Return effect