Filter
Top Products
Reference [Phrase Looping]
ZOOM MRS-1266
67
2.
Turn the dial to select the track number (1 - 10), and
use the cursor up/down keys to select the V-take
number (1 - 10).
On this screen, the stereo tracks 9/10 are treated as two
independent tracks. V-takes that are not currently selected
for tracks 1 - 10 can also be selected for loading.
When track 10 is selected, turning the dial further to the right
brings up the following screen.
When this screen is shown, turning the dial to the right
selects tracks in odd-numbered/even-numbered pairs (1/2, 3/
4, 5/6, 7/8, 9/10) or the master track. In this case, the
currently selected V-take for the two tracks or the master
track becomes the loading target.
3.
Press the [ENTER] key.
The display changes to “ImprtSrc START”. In this condition,
you can specify the start point for the data range to be
imported.
4.
Use the cursor left/right keys to move the flashing
section of the counter, and turn the dial to specify
the start point.
If you move the flashing section to the MARKER field on
the display, you can specify a mark by turning the dial. In
this case, the mark position becomes the import start point.
NOTE
• By holding down the STOP [P] key and pressing the PLAY
[
R] key, you can perform scrub playback of the V-take of
the specified track (
→ p. 52).
•The playback range of the phrase loop can be fine-adjusted
also after importing. Therefore it suffices if you make a
rough selection here.
NOTE
You cannot specify a point where there are no audio data. If
you try to do this, the indication “ ” appears on the display.
5.
When you have specified the start point, press the
[ENTER] key.
The display changes as follows.
6.
Specify the end point of the range in the same way.
If you press the PLAY [R] key, the specified range will be
played.
7.
When you have specified the end point, press the
[ENTER] key.
The indication “IMPORT SURE?” appears on the display.
8.
Press the [ENTER] key.
The phrase is imported. When the import process is
completed, the phrase menu appears again.
ImprtSrc
ImprtSrc
TR 1- 1
TR 1- 1
ImprtSrc
ImprtSrc
TR10- 1
TR10- 1
ImprtSrc
ImprtSrc
TR1/2
TR1/2
ImprtSrc
ImprtSrc
START
START
00000000
ImprtSrc
ImprtSrc
END
END
00013420
IMPORT
IMPORT
SURE?
SURE?