Filter
Top Products
Reference [Creating a CD]
ZOOM MRS-1266
135
Erasing a CD-RW Disc
All the information on a CD-RW disc (audio data or backup
data) can be erased, thereby returning the disc to the blank
state.
1.
Insert the disc to erase into the CD-R/RW drive.
2.
From the main screen, press the [AUDIO] key or
[BACK UP] key in the control section.
3.
Use the cursor left/right keys to bring up the
indication “AUDIO CD CDRW ERS” or “BACKUP
CDRW ERS“on the display, and press the [ENTER]
key.
The display shows “CdrwErs NORMAL”.
4.
Use the cursor up/down keys to select one of the
following two CD-RW erase methods.
●
NORMAL (Default setting)
Information from all areas of the disc is erased. This takes
longer than the QUICK erase operation, but all contents of
the disc are reliably erased. This method is recommended.
(Required time is max. 74 minutes for a 650 MB disc and 80
minutes for a 700 MB disc.)
●
QUICK
Only the track information on the CD-RW disc is erased.
This requires less time than the NORMAL erase operation.
5.
Press the [ENTER] key.
The display now shows the indication “CdrwErs SURE?”.
6.
To carry out the erase process, press the [ENTER]
key once more.
The erase process starts. During the operation, the display
shows “CdrwErs wait...”.
When the erasing process is finished, the display indication
changes to “CdrwErs COMPLETE”.
7.
To return to the main screen, press the [EXIT] key
several times.
CdrwErs
CdrwErs
NORMAL
NORMAL