Zoom MRS-1266 Musical Instrument User Manual


 
Reference [Rhythm]
ZOOM MRS-1266
99
3.
Press the [INSERT/COPY] key.
The screen for selecting the number of the copy destination
rhythm song appears.
4.
Turn the dial to select the copy destination rhythm
song.
NOTE
When you execute the copy, the contents of the destination
rhythm song will be completely erased and overwritten by
the copy source rhythm song. Take care not to accidentally
erase a song that you wish to keep.
5.
To execute the copy process, press the [ENTER]
key. To cancel, press the [EXIT] key.
When you press the [ENTER] key, the copy will be
executed, and the display returns to the rhythm song screen.
Erasing the rhythm song
This section explains how to erase the entire rhythm song,
resetting it to a blank state.
1.
From the main screen, press the [SONG] key so
that the key is lit.
2.
Press the [RHYTHM] key.
The [RHYTHM] key lights up, and a rhythm song can be
created or edited.
3.
Turn the dial to select the rhythm song to erase.
4.
Press the [DELETE/ERASE] key.
The indication “DELETE SURE?” appears on the display.
NOTE
Once you erase the rhythm song, it cannot be recovered.
Use this operation with care.
5.
Press the [ENTER] key to erase the rhythm song, or
press the [EXIT] key to cancel.
If you press the [ENTER] key, the rhythm song will be
erased and the display returns to the rhythm song screen.
Assigning a name to a rhythm song
You can edit the name of any rhythm song as follows.
1.
From the main screen, press the [SONG] key so
that the key is lit.
The rhythm section goes into rhythm song mode, and the
[RHYTHM] key flashes.
2.
Turn the dial to select the project and press the
[RHYTHM] key.
The [RHYTHM] key lights up, and a rhythm song can be
created or edited.
3.
Press the [EDIT] key.
The rhythm song edit menu appears on the display.
4.
Use the cursor left/right keys to bring up the
indication “EDIT NAME” on the display, and press
the [ENTER] key.
The rhythm song name is shown, and the first character
flashes.
5.
Use the cursor left/right keys to move the flashing
position to the character you want to change, and
turn the dial to select a character.
For information on available characters, refer to page 39.
COPY
COPY
2
2
å 9E
9E
DELETE
DELETE
SURE?
SURE?
EDIT
EDIT
Transpos
Transpos
NAME
NAME
Song006
Song006