Filter
Top Products
Quick Tour
ZOOM MRS-1266
29
3-2 Setting the insert effect
The MRS-1266 contains two types of effects: an "insert
effect" that can be inserted into a specific signal route, and a
"send/return effect" that can be applied to the entire song by
using the send/return of the mixer.
In this example, we will apply the insert effect to the
instrument connected to the INPUT jack.
1.
Press the [INPUT SOURCE] key in the effect
section.
The indication "IN SRC IN" appears on the display. This
screen serves for selecting the insert position of the effect.
If something else is shown, turn the dial to bring up the
indication "IN SRC IN".
2.
Press the [EFFECT] key in the display section.
The key lights up, and you can select a patch for the internal
effect. A "patch" is a set of previously saved settings for an
internal effect. A newly created project contains 190 patches
for the insert effect, and you can instantly change effect
settings simply by selecting one of these patches.
3.
Use the [ALGORITHM] keys in the effect section to
select an algorithm for the insert effect.
An "algorithm" is a combination of effect modules (individual
effects) that the insert effect lets you use simultaneously.
Insert effect patches are organized according to their
algorithm. First select an algorithm, and then select an effect.
There are five algorithms, as follows.
●
DUAL
An algorithm suitable for simultaneous recording of vocals
and guitar, or for two guitars or bass guitars.
●
GUITAR/BASS
An algorithm suitable for recording guitar or bass.
●
MIC
An algorithm suitable for vocals or mic recording.
●
LINE
An algorithm suitable mainly for recording stereo-output
instruments such as synthesizer or electric piano.
●
MASTERING
An algorithm suitable for processing a stereo mix signal,
such as during mixdown.
For this example, press the [GUITAR/BASS] key to select
the GUITAR/BASS algorithm. The [GUITAR/BASS] key
will light, and you can now select patches that use the
GUITAR/BASS algorithm.
HINT
For details on algorithms, refer to page 118.
3.
Turn the dial to select the patch.
4.
Press the [EXIT] key.
The unit returns to the main screen.
IN SRC
IN SRC
IN
IN
0
0
INSERT
INSERT
Standard
Standard
0
0
INSERT
INSERT
Standard
Standard
Patch name Patch number
1
1
INSERT
INSERT
MRS-Drv
MRS-Drv