Filter
Top Products
Introduction
ZOOM MRS-1266
11
Effect section
The MRS-1266 provides two types of effects: insert effect
and send/return effect. These effects can be used simul-
taneously and have the characteristics described below.
■ Insert effect
This effect can be inserted at one of the following three
points in the signal path.
(1) Immediately after the input jack
(2) A desired channel of the mixer
(3) Immediately before the [MASTER] fader
In the default condition, position (1) (immediately after
input jack) is selected.
When the setting is changed to (2), only a selected track or
drum/bass sound is processed by the effect.
When the setting is changed to (3), the final stereo mix can
be processed. This setting is suitable for processing the
signal of the entire song during mixdown.
■ Send/return effect
This effect is internally connected to the send/return loop of
the mixer section. There are two types of send/return effects,
reverb and chorus/delay, which can be used simultaneously.
The send level of each mixer channel adjusts the depth of the
send/return effect. Raising the send level will produce a
deeper reverb or chorus/delay effect for that channel.