Filter
Top Products
Reference [Rhythm]
ZOOM MRS-1266
114
Importing rhythm patterns and
rhythm songs from another
project
This section explains how to import rhythm pattern data and
rhythm song data from another project that was saved on the
hard disk.
1.
From the main screen, press the [RHYTHM] key.
The [RHYTHM] key lights up.
2.
Press the [UTILITY/TRACK EDIT] key in the display
section.
The rhythm utility menu for various rhythm section settings
appears.
3.
Use the cursor left/right keys to bring up the
indication “UTILITY Import” an the display, and
press the [ENTER] key.
The display shows the following screen.
4.
Turn the dial to select the project from which to
import data, and press the [ENTER] key.
The indication “Import SURE?” appears on the display.
5.
Press the [ENTER] key.
The data are imported into the current project. When the
process is completed, the screen of step 2 appears again.
6.
To return to the main screen, press the [EXIT] key
several times.
Editing various settings of the
rhythm section
This section explains how to edit various settings that affect
the entire rhythm section, such as adjusting the pad
sensitivity or adjusting the volume of the metronome.
Basic procedure
The basic procedure for editing the rhythm section settings
is the same for most items, as described below.
HINT
You can use the same procedure in either Rhythm pattern
mode or Rhythm Song mode.
1.
From the main screen, press the [SONG] key or the
[PATTERN] key.
If you have pressed the [SONG] key, the unit goes into
rhythm song mode. If you have pressed the [PATTERN] key,
the unit goes into rhythm pattern mode.
2.
Press the [RHYTHM] key.
The [RHYTHM] key lights up, and either the rhythm pattern
screen or the rhythm song screen will appear, depending on
which key was pressed.
3.
Press the [UTILITY/TRACK EDIT] key in the display
section.
The rhythm utility menu for various rhythm section settings
appears.
4.
Use the cursor left/right keys to select one of the
following items to edit, and press the [ENTER] key.
• Count
Change the length of the pre-count.
•ClickVol
Change the volume level of the metronome.
• PadSens
Change the pad sensitivity which determines the volume
level in relation to the force with which the pad is struck.
UTILITY
UTILITY
Count
Count
12
12
Import
Import
PRJ012
PRJ012
UTILITY
UTILITY
Count
Count