Filter
Top Products
Reference [MIDI]
ZOOM MRS-1266
152
6.
To select the MIDI channel to be assigned to the
internal bass program, use the cursor left/right
keys to bring up the indication “SMF ChToBass” on
the display, and press the [ENTER] key.
7.
Turn the dial to select one of the settings listed
below, and press the [EXIT] key.
●
OFF
No SMF playing information is sent to the bass program.
●
1 - 16
The playing information of the selected MIDI channel is
sent to the bass program and not to the MIDI OUT
connector.
HINT
The factory default setting is “9” (MIDI channel 9).
8.
To return to the main screen, press the [EXIT] key
several times.
SMF playback
You can select any SMF imported into a project and play it
as follows.
1.
From the main screen, press the [UTILITY/TRACK
EDIT] key in the display section.
The utility menu appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY SMF” on the display, and press
the [ENTER] key.
The indication “SMF IMPORT” appears on the display.
3.
Use the cursor left/right keys to bring up the
indication “SMF FILE SEL” on the display.
4.
Press the [ENTER] key.
The display changes as follows, allowing you to select an
imported SMF for playback.
5.
Turn the dial to select the SMF, and press the [EXIT]
key.
The file is selected, and the display returns to the condition
of step 3.
6.
To return to the main screen, press the [EXIT] key
several times.
7.
To play the SMF, press the PLAY [
R
] key.
The SMF is played in conjunction with the recorder section/
rhythm section.
NOTE
• When playing an SMF, the recorder section/rhythm section
will always be activated, regardless of the [RHYTHM] key
status (on/off).
• The beat information contained in the SMF is disregarded.
Locating a measure/beat in the song of the MRS-1266
may therefore lead to a mismatch with the measure/beat
of the SMF.
ChToBass
ChToBass
9CH
9CH
SMF
SMF
FILE SEL
FILE SEL
FILE SEL
FILE SEL
SEQ1
SEQ1