Filter
Top Products
Reference [Rhythm]
ZOOM MRS-1266
116
Checking the remaining amount of
memory
The remaining amount of recording memory for rhythm
patterns and the rhythm song will be displayed as a
percentage (%). Select “Memory” from the rhythm utility
menu and press the [ENTER] key. This screen is for display
only. There is no setting that can be edited.
Adjusting the volume of each pad
with the faders
If necessary, you can control the output level of each pad for
the currently selected drum kit with the faders while playing
a rhythm song/rhythm pattern.This is convenient when you
want to adjust the level for each drum/percussion sound
precisely before the mixdown.
1.
From the main screen, press the [SONG] key or the
[PATTERN] key.
The rhythm song mode is selected when you press the
[SONG] key, and the rhythm pattern mode is selected with
the [PATTERN] key.
2.
Press the [RHYTHM] key.
[RHYTHM] key lights up.
3.
Press the [DRUM MIXER] key.
[DRUM MIXER] key lights up, and the currently selected
pad bank/pad number and the level value are indicated on the
display.
4.
Use the faders to adjust the level of the respective
pad while playing a rhythm song/rhythm pattern.
The label under each fader shows which pad is controlled by
it.
When you operate a fader that controls another pad than the
currently assigned one, that pad becomes new editing target,
and the LEVEL setting changes.
5.
To return the main screen, press the [EXIT] key
several times.
The setting is saved to the respective drum kit.
NOTE
• The above control is valid for only currently selected drum
kit.
• When you change a drum kit, the level setting to be called
is the one programmed before.
Memory
Memory
24%
24%
Pad bank number Level value
Pad number
15
15
Dr Mixer
Dr Mixer
Pad=1-0
Pad=1-0
DRUM
BASS
12
PAD
x
PAD
9
PAD
+
PAD
0
PAD
1
PAD
2
PAD
3
8
9/10
MASTER
(11/12)
13
13
Dr Mixer
Dr Mixer
Pad=1-2
Pad=1-2