Filter
Top Products
130 L4400 User’s Guide
6 L4437A General Purpose Switch
L4437A SCPI Command Summary
Table 6-1 lists the instrument-specific SCPI commands that apply to the
L4437A General Purpose Switch Instrument. Table 3-3 (Chapter 3) lists the
SCPI commands that apply to all L4400 series instruments.
For complete information on all SCPI commands, refer to the Programmer’s
Reference contained on the L4400 Product Reference CD-ROM (p/n
34989-13601).
Table 6-1. L4437A SCPI Command Summary.
Subsystem
Commands
ROUTe
(Switch Control)
ROUTe:CHANnel:LABel:CLEar:MODule 1
ROUTe:CHANnel:LABel[:DEFine] "<label>" , (@<ch_list>)
ROUTe:CHANnel:LABel[:DEFine]? [{USER|FACTory},]
(@<ch_list>)"
ROUTe:CLOSe (@<ch_list>)
ROUTe:CLOSe? (@<ch_list>)
ROUTe:CLOSe:EXCLusive (@<ch_list>)
ROUTe:MODule:BUSY? 1
ROUTe:MODule:WAIT 1
ROUTe:MODule:WAIT? 1
ROUTe:OPEN (@<ch_list>)
ROUTe:OPEN? (@<ch_list>)
ROUTe:OPEN:ALL 1
ROUTe[:OPERation]:OVERlap[:ENABle] {OFF|0|ON|1}
ROUTe[:OPERation]:OVERlap[:ENABle]?
ROUTe
(Sequence
Operation)
ROUTe:SEQuence:ABORt
ROUTe:SEQuence:BUSY?
ROUTe:SEQuence:CATalog?
ROUTe:SEQuence:DEFine <name>, "<commands>"
ROUTe:SEQuence:DEFine? <name>
ROUTe:SEQuence:DELete:ALL
ROUTe:SEQuence:DELete[:NAME] <name>
ROUTe:SEQuence:RUNNing:NAME?
ROUTe:SEQuence:TRIGger[:IMMediate] <name>
ROUTe:SEQuence:TRIGger:SOURce <name>, MANual
ROUTe:SEQuence:TRIGger:SOURce? <name>
ROUTe:SEQuence:WAIT
DIAGnostic
DIAGnostic:RELay:CYCLes? (@<ch_list>)
DIAGnostic:RELay:CYCLes:CLEar (@<ch_list>)
SYSTem
SYSTem:MODule:PFAil:JUMPer:AMP5? 1
SYSTem:MODule:TEMPerature? [{TRANsducer|TTHReshold}], 1