Filter
Top Products
Software Installation and Configuration 2
L4400 User’s Guide 25
Figure 2-9. Verifying a Communication Path to the Instrument.
The LAN Instrument window identifies the instrument’s host name, its IP
address, its VISA address, and product number. Because the network server
used in this example does not support Dynamic DNS, the host name is not reg-
istered for use by the server. Thus, the instrument is accessed by its IP
address.
Click on “Test Connection” or “Identify Instrument” to test the communication
path to the instrument. Click on”OK” to add the configured instrument to your
network.
Repeat the sequence of Figures 2- 7 through 2- 9 for each instrument. As instru-
ments are added, they appear in the Agilent Connection Expert Explorer pane
as shown in Figure 2- 10. Selecting the instrument in the Explorer pane dis-
plays its properties in the Properties pane.
Click either to
test connection
Note serial number to identify
multiple instruments