Filter
Top Products
Software Installation and Configuration 2
L4400 User’s Guide 41
Click ‘Next’ until the window shown in Figure 2-22 appears.
Figure 2-22. Firmware Update Utility Firmware File Selection.
2. Using the ‘Browse’ button, specify the path to the firmware file and then
click ‘Next’.
NOTE
The ‘Applicable Model’ window lists the L4400 series instruments which
are updateable by the current firmware (.xs) image. The window is
NOTused to select the instrument receiving the firmware update.
Firmware updates are performed on one instrument at a time. Once the
firmware update is complete, you must exit and re-start the utility to
update each instrument.