Agilent Technologies L4400 Guitar User Manual


 
L4450A 64-Bit Digital I/O with Memory and Counter 8
L4400 User’s Guide 197
ROUTe
(Monitor)
(Scanning)
(Switch
Control)
(Sequence
Operation)
ROUTe:MONitor:DATA?
ROUTe:MONitor:MODE {CHANnel|DMM}
ROUTe:MONitor:MODE?
ROUTe:MONitor:STATe {OFF|0|ON|1}
ROUTe:MONitor:STATe?
ROUTe:MONitor[:CHANnel] (@<channel>)
ROUTe:MONitor[:CHANnel]?
ROUTe:MONitor[:CHANnel]:ENABle {OFF|0|ON|1}, (@<ch_list>)
ROUTe:MONitor[:CHANnel]:ENABle? (@<ch_list>)
ABORt
INITiate
ROUTe:CHANnel:DELay {<seconds>|MIN|MAX|DEF}, (@<ch_list>)
ROUTe:CHANnel:DELay? [{MIN|MAX}, ] (@<ch_list>)
ROUTe:CHANnel:DELay:AUTO {OFF|0|ON|1}, (@<ch_list>)
ROUTe:CHANnel:DELay:AUTO? (@<ch_list>)
ROUTe:SCAN (@<scan_list>)
ROUTe:SCAN?
ROUTe:SCAN:ADD (@<ch_list>)
ROUTe:SCAN:REMove (@<ch_list>)
ROUTe:SCAN:ORDered {OFF|0|ON|1}
ROUTe:SCAN:ORDered?
ROUTe:SCAN:SIZE?
ROUTe:CHANnel:LABel:CLEar:MODule 1
ROUTe:CHANnel:LABel[:DEFine] "<label>" , (@<ch_list>)
ROUTe:CHANnel:LABel[:DEFine]? [{USER|FACTory},] (@<ch_list>)
ROUTe:SEQuence:CATalog?
ROUTe:SEQuence:DEFine <name>, "<commands>"
ROUTe:SEQuence:DEFine? <name>
ROUTe:SEQuence:DELete:ALL
ROUTe:SEQuence:DELete[:NAME] <name>
ROUTe:SEQuence:DONE?
ROUTe:SEQuence:TRIGger[:IMMediate] <name>
ROUTe:SEQuence:TRIGger:SOURce <name>, {ALARm1|ALARm2|MANual}
ROUTe:SEQuence:TRIGger:SOURce? <name>
ROUTe:SEQuence:WAIT
OUTPut
(Alarm Limit)
OUTPut:ALARm{1|2}:CLEar
OUTPut:ALARm:CLEar:ALL
OUTPut:ALARm:MODE {LATCh|TRACk}
OUTPut:ALARm:MODE?
OUTPut:ALARm{1|2}:SEQuence?
OUTPut:ALARm:SLOPe {NEGative|POSitive}
OUTPut:ALARm:SLOPe?
OUTPut:ALARm{1|2}:SOURce (@<ch_list>)
OUTPut:ALARm{1|2}:SOURce?