Filter
Top Products
60 Altera Corporation
32-Bit Instruction Set
LDP
Load 32-bit Data From Memory (Pointer Addressing Mode)
Operation: Not preceded by PFX:
RA ← Mem32[align32(RP +(IMM5 × 4))]
Preceded by PFX:
RA ← Mem32[align32(RP +(σ(K : IMM5) × 4))]
Assembler Syntax: LDP %rA,[%rP,IMM5]
Example: Not preceded by PFX:
LDP %o3,[%L2,3] ; Load %o3 from [%L2 + 12]
; second register operand must be
; one of %L0, %L1, %L2, or %L3
Preceded by PFX:
PFX %hi(100)
LDP %o3,[%L2,%lo(100)] ; load %o3 from [%L2 + 400]
Description: Not preceded by PFX:
Loads a 32-bit data value from memory into RA. Data is always read from a word-
aligned address given by bits 31..2 of RP (the two LSBs of RP are ignored) plus
a 5-bit, unsigned, word-scaled offset given by IMM5.
This instruction is similar to LD, but additionally allows a positive 5-bit offset to be
applied to any of four base-pointers in a single instruction. The base-pointer must
be one of the four registers: %L0, %L1, %L2, or %L3.
Preceded by PFX:
A 16-bit offset is formed by concatenating the 11-bit K-register with IMM5 (5 bits).
The 16-bit offset (K : IMM5) is sign-extended to 32 bits, multiplied by four, and
added to bits 31..2 of RP to yield a word-aligned effective address.
Condition Codes: Flags: Unaffected
Instruction Format: RPi5
Instruction Fields: A = Register index of operand RA
IMM5 = 5-bit immediate value
P = Index of base-pointer register, less 16
1514131211109876543210
1 0 1 1 P IMM5 A
NVZC
−−−−