Filter
Top Products
MGP 464 • Firmware Upgrade Guide
B-2
Firmware Upgrade Guide
PRELIMINARY
Updates to the Extron MGP 464 Multi-Graphic Processor rmware are made
available periodically via the Extron Web site. If the need arises, you can replace
the MGP 464’s main rmware via an IP connection without opening the unit.
Determining the Firmware Version
There are three ways to check which version of rmware the MGP 464 is using:
view the front panel LCD window during power-on, view the System Status page
of the MGP 464’s embedded Web pages, or select About MGP... from the Windows-
based control software Help menu.
Using the LCD display at power-on
Watch the LCD window as you connect the MGP 464 to a power source. The rst
piece of information displayed on the screen is the firmware version (along with the
product name).
Multi-Graphic
Processor
2 sec.
Power
on
Extron
MGP 464 V1.01
2 sec.
Default
Cycle
Power-up cycle flow diagram
Using a Web browser
The MGP 464 comes from the factory with a set of default embedded Web pages.
The System Status Web page displays the rmware version of your unit, along with
other information such as your MGP’s IP address and part number.
To use the Web pages to nd out the current rmware version number,
1
. Connect the MGP 464 to a PC via an Ethernet connection (using a crossover
cable), or connect the MGP and the PC to a network/LAN (using a straight-
through cable). See “Rear Panel Features” in chapter 2 for details.
2
. Start a Web browser program (such as Microsoft
®
Internet Explorer).
3
. Enter the MGP 464’s IP address in the browser’s Address eld.
N
If your local system administrators have not changed the value, use the factory-
specified default, 192.168.254.254, for this field.
4
. Press the Enter key. If the MGP 464’s HTML pages are not password
protected, the browser displays the System Status page.
If the MGP 464’s HTML pages are password protected, the browser displays
the Enter Network Password dialog box, shown on the next page.