Filter
Top Products
Operation, cont’d
MGP 464 • Operation
3-22
PRELIMINARY
Button Display Function Range Adjust Knob
Detail
DETAIL
nnnn
Adjust image sharpness.
000 - 127
Default: 064
Either
Window/
Image
Position
WINDOW_n CNTR:
H=±nnnn V=±nnnn
Position window 1, 2,
3, or 4 on the output
screen in relation to
center.
Default: 0000 ± the
output rate
For H:
horizontal [
Adjust knob
For V:
vertical {
Adjust knob
(Press button twice.)
IMAGE #nn START:
H=±nnnn V=±nnnn
Position the image
within the window in
relation to the window
center.
Default: 0000 ± the
output rate
Color/Tint
COLOR TINT
nnnn nnnn
Color: Adjust color
intensity. (At the lowest
adjustment, all colors
are shades of gray.)
Tint: Change the
appearance of colors.
Color: 000 - 127
Default: 064
Tint: 000 - 127
Default: 064
Color:
horizontal [
Adjust knob
Tint:
vertical {
Adjust knob
Window/
Image Zoom
WINDOW_n ZOOM:
H=nnnn V=nnnn
Increase/decrease the
size of the selected
window while keeping
the aspect ratio
constant.
Min: 1/16 of the
output rate
Max: Output rate
For H:
horizontal [
Adjust knob
For V:
vertical {
Adjust knob
(Press button twice.)
IMAGE #nn ZOOM:
H=nnnn V=nnnn
Increase/decrease the
size of the image in the
selected window while
keeping the aspect ratio
constant.
Min: 1/16 of the
output rate
Max: 2 times the
output rate
Adjusting the picture controls
Make image adjustments to an input by using the picture control buttons on the
front panel. When you select one of these buttons, the button for the most recently
adjusted window lights, indicating that the window is being adjusted.
To adjust the picture controls,
1
. Press the Window Select button to select the window you want to adjust.
2. Press the Input button for the input that you want to adjust, if it is not
currently selected.
3
. Press the button for the desired picture control: Window/Image Size (sizing),
Bright/Cont (brightness and contrast), Detail (sharpness), Window/Image
Position (moving and centering), Color/Tint (color quality), or Window/
Image Zoom (magnication).
4
. Rotate the horizontal Adjust (
[
) and/or vertical Adjust ({) knobs to select a
level from the available range.
5
. Repeat steps 1 through 4 for each image adjustment to be made for the
selected input/window.
N
The LCD screen may display “NA” in place of a number if that adjustment does
not apply to the input’s video format.