Extron electronic MGP 464 DI DJ Equipment User Manual


 
MGP 464 • Software Conguration and Control
4-2
Software Conguration and Control
PRELIMINARY
The MGP 464 can be congured and controlled by software via the following
interfaces:
RS-232 or RS-422 (Simple Instruction Set [SIS
] commands or Windows
®
-
based control software)
LAN (Web pages, SIS commands, or Windows-based control software)
This chapter discusses the use of the SIS commands and how to access the
Windows-based control software. For instructions on using the Windows-based
control software, refer to the software's Help program. See chapter 5, "HTML
Conguration and Control," for information on using the Web pages.
Setting Up Serial Communication
The MGP 464 has two serial communication ports: the RS-232/422 port, accessed
via a 9-pin female D-sub connector on the rear panel, and the Config port, a 2.5 mm
TRS connector on the front panel. These ports are used to connect to a host or
external controlling device, such as a computer or control system, which can
generate the proper command codes and recognize the processor’s responses.
Connector pin assignments
The 9-pin RS-232/422 connector on the rear panel (see the
illustration at right) has the following pin assignments:
The 2.5 mm TRS RS-232 connector on the front panel may be connected to a
computer via the optional 9-pin D to 2.5 mm stereo mini TRS RS-232 cable
(part #70-335-01). The pin assignments are shown below.
6 feet
(1.8 m)
Part #70-335-01
9DBF-2.5mm TRS cable_031504.eps
5
1
9
6
Sleeve (Gnd)
Ring
Tip
9-pin D Connection TRS Plug
Pin 2 Computer's RX line Tip
Pin 3 Computer's TX line Ring
Pin 5 Computer's signal ground Sleeve
Front panel RS-232 configuration port pin assignments
Pin RS-422 function Description
1 No connection
2 Tx- Transmit ground
3 Rx- Receive ground
4 No connection
5 Gnd Signal ground
6 No connection
7 Rx+ Receive data
8 Tx+ Transmit data
9 No connection
Pin RS-232 function Description
1 No connection
2 Tx Transmit data
3 Rx Receive data
4 No connection
5 Gnd Signal ground
6 No connection
7 No connection
8 No connection
9 No connection
5 1
96