Filter
Top Products
SIS
™
Programming and Control, cont’d
MGP 464 • Software Conguration and Control
4-32
PRELIMINARY
Command/response table for IP SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(Processor to host)
Additional description
IP setup commands (continued)
Set administrator password
E
X3#
CA
}
W
X3#
CA
|
Ipa •
X4!
]
Set administrator access password
X3#
.
X3#
= 4 to 12 alphanumeric characters. The
password is case sensitive. Special characters
(spaces or symbols) are not allowed.
X4!
= password displayed as four asterisks
(
****
).
Clear administrator password
24
E
• CA
}
W %20 CA
|
Ipa •
]
Clear/remove all passwords (administrator
and user).
N
A user password cannot be assigned if an administrator password does not exist. Entering a password when the MGP 464 has not been configured yields an E14 error response
from the processor. If the administrator password is cleared (removed), the user password is removed also.
View administrator password
E
CA
}
W CA
| X4!
]
View password level
X4!
, shown with leading
zeros.
Set user password
14 24
E
X3#
CU
}
W
X3#
CU
|
Ipu •
X4!
]
Set user password
X3#
(4-12 alphanumeric
characters). The password is case sensitive.
Special characters (spaces or symbols) are not
allowed.
N
A user password cannot be assigned if an administrator password does not exist.
Clear user password
24
E
• CU
}
W %20 CU
|
Ipu •
]
Clear the user password only.
View user password
E
CU
}
W CU
| X4!
]
View password level
X4!
, shown with leading
zeros.
Set extended level password
24
E
X5!
,
X3#
CO
}
W
X5!
2%C
X3#
CO
|
Ipo
X5!
•
X4!
]
Set password
X3#
for security level
X5!
.
X5!
= 1 through 10.
Clear extended level password
24
E
X5!
, CO
}
W
X5!
2%C CO
|
Ipo
X5!
•
]
Remove password from security level
X5!
.
View extended level password
E
X5!
CO
}
W
X5!
CO|
X4!
]
View password level
X4!
, shown with leading
zeros.
Set read-only security level support
24
E
X6^
*
X6*
EP
}
W
X6^
%2A
X6*
EP
|
Pvo
X6^
*
X6*
]
Enable no-password login at security level
X6*
.
For
X6^
:
0 = no-password logon disabled
1 = no-passwors logon enabled
For
X6*
:
0 = no-password logon is placed one level
below the lowest existing password level (0
through 11).
1 through 11 = no-password logon enabled
at the level specified if an admin. password
exists.