Konica Minolta CM-2600d Drums User Manual


 
E-19
Preparation
Connecting the AC Adapter
M
emo
Use of the AC adapter (AC-A17) rather than batteries is recommended, since more power will be required when the
external output terminal is used to output data to an external device or print it.
Note
To supply AC power to the instrument, always use the AC adapter (AC-A17) supplied with the instrument.(Rat-
ed: 5 V, 2.8 A)
Before connecting or removing the AC adapter, make sure that power is turned OFF.
[Operating Procedure]
1
Make sure that power is OFF (i.e. the power
switch is set to “ ”).
2
Connect the AC adapter’s connector plug to
the AC adapter terminal on the rear of the in-
strument.
3
AC outlet
Insert the AC adapter’s power plug to an AC
outlet (100-240 VAC, 50-60 Hz).