Filter
Top Products
E-29
Initial Setting
The following five initial setting items are available.
(1) REMOTE..................... Connects the instrument to the PC to enable bi-directional communications.
(2) AUTO PRINT.............. If the instrument is connected to a printer, measured data will be printed au-
tomatically each time measurement is taken.
(3) CLOCK........................ Adjusts the instrument’s built-in clock.
(4) DISPLAY INVERT..... Reverses the display direction.
(5) LCD CONTRAST ....... Adjusts the LED’s contrast.
M
emo
“(1) REMOTE” and “(2) AUTO PRINT” can be used when connecting the instrument to a PC or printer.
The settings will be kept even if the power is turned OFF.
To make initial settings, follow the procedure given below:
[Setting Procedure]
1
Turn the power ON.
2
Turn B to select “MENU”, then press A.
The <MENU> screen will appear.
The initial settings can be made in
this screen.