Konica Minolta CM-2600d Drums User Manual


 
E-54
Setting Color Difference Tolerances
3
Turn B to select the desired target color no. (T
*
), then press A.
E” will return to “D.
Keeping B held down to left or right will cause the target color No. to change continuously.
4
Turn B to select “TOLERANCE”, then press A.
A screen that allows selection of
the tolerance type will appear.
If tolerances have already been
set, they will be displayed, so
skip to step 6.
Example when “M/I+E” is set for “MASK/GLOSS” condition
item.
Example when “M/SCI” is set for “MASK/GLOSS” condition
item.
5
Turn B to select “BOX”, then press A.
6
Turn B to select “ADJUST”, then press A.