Filter
Top Products
E-94
Connecting to an External Device
Printer Cable Wiring Diagram
• For D-sub, 9pin
5
9768
4321
3
5
8
18
TXD
GND
CTS
Pin No. Signal
Printer
(For D-sub, 9-pin)
Instrument
DATA
GND
BUSY
3
5
8
Signal Pin No.
• For D-sub, 25pin
3
5
8
18
TXD
GND
CTS
Pin No. Signal
Printer
(For D-sub, 25-pin)
Instrument
DATA
BUSY
GND
2
5
7
Signal Pin No.
Auto Print
If Auto Print has been setup beforehand, the measurement data can be printed as each measurement is
made.
Note
The instrument and printer must be connected using a printer cable that is wired as shown in “Printer Cable Wir-
ing Diagram” (page E-92).
[Procedure]
Make sure that power to the instrument is turned OFF.
1. Connect the instrument to the printer with a printer cable.