Filter
Top Products
130
Recording and Saving the Performance
7.
Touch <Add On>.
The following screen appears.
Selecting the Track to Record
8.
Press the track button for the track that you want to record (i.e., the track that you want to play yourself).
The indicator of the button you pressed will blink, and the RM-700 enters recording-standby mode.
Since in this example we will record the upper part performance, press the [Right] button to make the button’s indicator light blink.
Only the automatic accompaniment and the drum set or SFX set can be recorded to the [Accomp] button.
Start Recording
9.
Press the [
(Play/Stop)] button.
A two-bar count-in plays, then recording starts.
Even without pressing the [ (Play/Stop)] button, recording starts when you play the keyboard. There is no count-in played
when you start by playing rather than pushing the [ (Play/Stop)] button.
When recording starts, the [ (Play/Stop)] and [ (Rec)] buttons’ indicators light up.
Stop Recording
10.
Press the [
(Play/Stop)] button.
Recording stops.
Play Back the Recorded Performance
11.
Press the [
(Prev)] button, then press the [ (Play/Stop)] button.
The recorded performance is played back.
When you press the [ (Play/Stop)] button, playback stops.
RM-700_e.book 130 ページ ２００９年３月１８日 水曜日 午前１１時５分