Roland RM-700 Electronic Keyboard User Manual


 
41
Performance
When using layer performance (p. 38*) or split performance (p. 39), you can change the pitch of the keyboard’s sound in octave units.
This function is called “Octave Shift.”
For example, when playing a Layer performance, if you change the pitch of one of the tones and then layer it, it changes the
impression created with the tone.
You can’t change the Octave Shift setting for Upper unless you’re using Split performance.
1.
In the Basic screen, touch <Layer1> or <Split>.
The RM-700 switches to layer performance or split performance.
2.
To apply Octave Shift, touch the name of the tone you’ve selected.
3.
Press the Tone button to display the Tone selection screen.
4.
In the lower left of the screen, touch <Octave>.
The “Octave Shift” screen appears.
5.
Touch
to adjust the pitch of the sound.
The sound can be changed from two octaves lower than the original sound (-2) to two octaves above the original (+2).
* If you touch <Reset>, the setting will return to its factory-set value.
6.
When you’ve specified the desired value, touch <OK>.
Shifting the Keyboard Pitch in Octave Steps (Octave Shift)
RM-700_e.book 41 ページ 2009年3月18日 水曜日 午前11時5分