Filter
Top Products
197
Connecting External Devices
Making Connections
1.
Minimize the volume of the RM-700 and of the MIDI
equipment you are connecting.
2.
Switch off power to the RM-700 and the MIDI equipment
you are connecting.
3.
Use MIDI cables (commercially available) to connect the
MIDI connectors to the connectors of the other
equipment (refer to the figure).
4.
Switch on power to the RM-700 and the connected MIDI
equipment.
5.
Adjust the volume of the RM-700 and the connected MIDI
equipment.
6.
If necessary, make MIDI settings.
1.
Press the [Menu] button so its indicator is lit.
2.
Touch <Settings>.
* The Menu screen for Settings contains five screen pages.
Touch
to switch between the pages.
3.
Touch <MIDI> or <Program Change>.
The following screen appears.
4.
To change the setting, touch
for the item you
want to specify.
If you touch <Reset>, the currently selected setting
(parameter) will return to its factory setting.
5.
Press the [Exit] button when you’ve finished making
settings.
This setting specifies the MIDI channel on which the RM-700 will
transmit. MIDI uses sixteen “MIDI channels,” which are numbered 1
through 16. By connecting MIDI devices and specifying the
appropriate MIDI channel for each device, you can play or select
sounds on those devices.
The RM-700 will receive all sixteen channels (1–16).
Playing a MIDI Sound Module from the RM-
700
MIDI IN
MIDI sound module
MIDI cable
MIDI Settings
Changing the MIDI Transmit Channel
(Tx Channel)
Setting
1–16
RM-700_e.book 197 ページ ２００９年３月１８日 水曜日 午前１１時５分