Filter
Top Products
157
Creating and Editing Songs
You can change the Tones and volume, as well as mute the
playback, for each individual part in songs recorded with the 16-
track Sequencer and the internal songs.
Because commercially available Roland SMF music files are also
made up of 16 Parts, you can change the settings for the
individual Parts and play them back in the same way.
* First, select the song for which the settings are to be made (p. 75).
1.
Display the 16-track Sequencer screen (p. 156).
2.
Touch the screen to choose the Part for which you want
to make settings.
Change the settings for the selected Part.
When you touch <Clear>, a message asking you to confirm the
deletion appears. To erase the recorded sound, touch <OK>. If
you don’t want to erase the recorded sound, touch <Cancel>.
Once a performance has been erased, it can’t be restored.
You cannot touch <Clear> during playback of the song.
3.
Touch <Part> to make more detailed settings for the
selected part.
The following screen appears.
• You can change the Tone for the selected Part by pressing a Tone
button while this screen is displayed. The Part name and tone name
are displayed at the top of the screen.
• When selecting Part 10 or 11, you can touch <Drum Set> to select
the drum set or effect sound.
4.
Touch
for the corresponding item to change the
setting.
You can adjust the values by touching the desired parameter and
turning the dial or by touching and dragging the slider.
When you press the [ (Play/Stop)] button, you hear what the
song sounds like as you change the settings. When you press the
[ (Play/Stop)] button, playback of the song stops.
5.
Touch
to make settings for other parts.
The Part name appears at the upper part of the screen.
Change the settings for other parts as needed.
6.
Hold down the [
(Rec)] button and press the [
(Prev)] button.
This operation set the changes in the settings.
If you do not want to delete a song after changing the settings for
the individual parts, save the song to a USB memory or to user
memory (p. 134).
You cannot save the settings that determine whether sounds
for each individual part are played or not (solo and mute).
If the Following Message Appears
If you try to display another screen after you’ve changed the song’s
settings for each Part, a message like the one below may appear.
Touch <OK> to change the song’s settings.
Touch <Cancel> to discard the changes you’re made.
Modifying the Settings of Each Part
Display
Function
<Solo>
Only the selected Part is played back.
<Mute>
Toggles playback of the selected Part to on or off.
<Clear>
The performance data for the selected part is deleted.
Display
Explanation
Volume
Changes the volume level.
Reverb
Changes the amount of reverb effect applied to the sound.
Chorus
Changes the amount of chorus applied.
Panpot
Shifts the direction from which the sound is heard between
left and right.
Touch to shift the sound to the right, or touch to
shift it to the left.
RM-700_e.book 157 ページ ２００９年３月１８日 水曜日 午前１１時５分