Filter
Top Products
164
Creating and Editing Songs
”PC” stands for “Program Change,” which is a command that
tells an instrument to change the sound it’s using. With songs
that rely on the use of a variety of sounds, a “PC” needs to be
located at every point within the song where the Tone is to be
changed.
Some edits can’t be undone, not even by choosing “Undo.” We
recommend saving songs to external memories or to user
memory before editing. For more on how to save songs, refer
to “Saving Songs” (p. 134).
Editing
5.
Touch the item to be edited.
6.
Set the value with the [Value] dial.
To cancel the operation once it is underway, press the [Exit] button.
7.
When you’re done making all the settings, touch
<Execute>.
When you are finished editing the setting, return to the “Song Edit”
screen.
Press the [Exit] button to return to the Menu screen.
You can play back edited songs by pressing the [
(Play/
Stop)] button in the “Song Edit screen.”
You can cancel an editing operation that you’ve just carried out. This
is handy when you want to undo an edit and restore data to the way
it was before.
There are some edits that can’t be restored.
At Step 4 of “Selecting the Editing Function” (p. 163), select <Undo>.
Editing functions that can be undone appear on screen.
If you touch <Cancel>, the undo is cancelled, and you’re returned to
the Song Edit screen.
If you touch <OK>, the confirmation message appears on screen.
Touch <OK> to undone the most recent edit.
You can copy a portion of a performance to a different bar in the
same Part or to a measure in another Part. This is handy when you’re
composing a song that repeats a similar phrase.
At Step 4 of “Selecting the Editing Function” (p. 163), select <Copy>.
A screen like the one shown below appears.
Undoing Edits (Undo)
Copying Measures (Copy)
Item
Content
From
Measure number of the first measure of the segment to be
copied
For
Number of measures to be copied
Src
Copy-source Track button or part number
Choosing “All” copies all Parts. “- - -” appears in the <Dst>
column.
If you choose a Track, you can only copy to the selected Track.
You cannot copy to the other Track.
Dst
Copy-destination part number
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the copy destination, this
previous recording is erased, and the copied data is written in
its place.
Mix
If there is a performance recorded at the copy destination, the
copied data is layered over the previous recording. If the Tones
used for the copy source and copy destination are different,
the copy-destination Tone is used.
Insert
If there is a performance recorded at the copy destination, the
copied portion is inserted without erasing the previous
recording. The song is lengthened by the number of inserted
measures.
To
Copy-destination measure number
When “End” is selected, the data is copied to the end of the
song.
Times
Number of times the data is to be copied
1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 10
Ex. To copy measures 5–7 to measure 8.
RM-700_e.book 164 ページ ２００９年３月１８日 水曜日 午前１１時５分