Filter
Top Products
Song Mode [SONG]
Reference
DTXTREME III Owner’s Manual
101
Drum Kit mode
Reference
Song modeClick modeTr igger modeFile modeUtility modeChain modeSampling mode
03: Copy Track
This job copies all data from the specified track of the spec-
ified Song to the specified track of the current Song.
1 Source Song number
Determines the copy source Song number.
B Source Track number
Determines the copy source track number of the Song speci-
fied at 1.
C Destination Track number
Determines the destination track number of the current Song.
04: Clear Track
This job clears all data from the specified track of the cur-
rent Song.
1 Track
Determines the track number to be cleared.
01: Copy Measure
This job copies all data from the specified measure range of
the specified track of the specified Song to the specified
measure range of the specified track of the current Song.
1 Source Song number
Determines the source Song number.
B Source Track number
Determines the source track number of the Song number
specified at 1.
C Starting measure number of source measure
range
Determines the starting measure of the source measure range.
D Ending measure number of source measure
range
Determines the ending measure of the source measure range.
E Destination Track number
Determines the destination track number of the current Song.
F Destination measure number
Determines the starting measure of the destination measure
range.
Settings PRE: 01 – 87, USR: 01 – 50
NOTE
• The songs “EXT: 01” – “EXT: 99” (SMF songs saved in the root direc-
tory of the USB storage device connected to the USB TO DEVICE ter-
minal) cannot be selected here.
Settings 1, 2
Settings 1, 2
• This Job overwrites any data already existing in the destination
track.
Settings 1, 2
1
2
3
CAUTION
1
Measure Jobs
[SF3] MEAS
NOTE
• When the cursor is located at a measure-related parameter, “NUM” is indi-
cated in the tab corresponding to the [SF6] button, meaning that you can
use the [F1] – [F6] buttons and the [SF1] – [SF5] buttons as numeric key
pads by pressing the [SF6] NUM button.
• This Job overwrites any data already existing in the destination mea-
sure range of the track.
Settings PRE: 01 – 87, USR: 01 – 50
Settings 1, 2
Range 001 – 999
Range 001 – 999
Settings 1, 2
Range 001 – 999
CAUTION
1 2 3 4
5 6