Filter
Top Products
Utility Mode [UTILITY]
Reference
DTXTREME III Owner’s Manual
129
Drum Kit mode
Reference
Song modeClick modeTr igger modeFile modeUtility modeChain modeSampling mode
From this display, you can set the parameters related to the
Insertion Effect Types applied to audio signals input via the
AUX IN/SAMPLING IN jack.
1 InsConnect
Determines the effect routing for Insertion Effects A and B.
The setting changes are shown on the diagram in the display,
giving you a clear picture of how the signal is routed.
Ins A to B Signals processed with Insertion Effect A will
be sent to Insertion Effect B.
Ins B to A Signals processed with Insertion Effect B will
be sent to Insertion Effect A.
B Insertion A (Insertion A Category/Type)
C Insertion B (Insertion B Category/Type)
Determines the Insertion Effect A/B type after selecting a cat-
egory. From the Category column, you can select one of the
Effect Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect Types
listed in the selected Category.
D [SF5] BYPASS
Pressing this button toggles the bypass status of the Insertion
Effect between on and off. When Bypass is turned off
(BYPASS is shown with white text in black), the Insertion
Effect will be applied to the audio signals input via the AUX
IN/SAMPLING IN jack. When Bypass is turned on (BYPASS
is shown with black text in white), the Insertion Effect will be
bypassed for the audio signals input via the AUX IN/SAM-
PLING IN jack.
From these displays, you can set the Insertion Effect Types
applied to the audio signals input via the AUX IN/SAM-
PLING IN jack.
1 Category
B Type
From the Category column, you can select one of the Effect
Categories, each of which contains similar Effect types. From
the Type column, you can select one of the Effect Types listed
in the selected Category.
C Pre
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This parameter
lets you call up the pre-programmed settings of these effect
parameters.
D Effect parameters
The number of parameters and values available differs
depending on the currently selected effect type. Refer to page
72 for details about the Effect parameters. Refer to the sepa-
rate Data List booklet for information on the parameters for
each Effect type.
E [SF5] BYPASS
Pressing this button toggles the bypass status of the Insertion
Effect between on and off. When Bypass is turned off
(BYPASS is shown with white text in black), the Insertion
Effect will be applied to the audio signals input via the AUX
IN/SAMPLING IN jack. When Bypass is turned on (BYPASS
is shown with black text in white), the Insertion Effect will be
bypassed for the audio signals input via the AUX IN/SAM-
PLING IN jack.
F PAGE >>
>>
This appears when another page can be called up from the
current page. Use the Cursor [MM
MM
] or [NN
NN
] button to call up
another page.
Insertion Effect Connection Settings
[SF2] INSTYPE
NOTE
•For details about the Effect structure of the DTXTREME III, see page 68.
Settings Ins A to B, Ins B to A
Settings
Details about the Effect categories are
described on page 70.
1 4
2
3
Insertion Effect Type Settings
[SF3] Ins A, [SF4] Ins B
Settings
Details about the Effect categories are
described on page 70.
3
1
2
6
5
4