Filter
Top Products
Song Mode [SONG]
Reference
DTXTREME III Owner’s Manual
103
Drum Kit mode
Reference
Song modeClick modeTr igger modeFile modeUtility modeChain modeSampling mode
This job sets tone generator parameters, such as voice, vol-
ume and pan, for all 16 MIDI channels. According to the
settings here, the parameter values for all MIDI channels
are transmitted to the internal tone generator or external
tone generator via MIDI OUT when the current Song is
selected.
This Job display consists of three pages.
The first page of the Voice Job
1 CH
Indicates the MIDI channel.
B TRANSMIT
Determines whether or not the MIDI messages will be trans-
mitted to the internal and external tone generator when the
current Song is selected. When set to All, selecting the current
Song transmits all MIDI messages for the corresponding
channel to the internal and external tone generator according
to the settings made at 3 – L. When set to PC, selecting the
current Song transmits only the Voice-related settings made at
5 – 6. When set to off, selecting the current Song transmits
no MIDI messages and the following parameters 3 – L are
not available.
C VOLUME
Determines the value of the Volume (Control Change number
7) for each MIDI channel.
D PAN
Determines the value of the Pan (Control Change number 10)
for each MIDI channel.
The second page of the Voice Job
E VOICE NUM (Voice Number)
Determines the Program Change number for each MIDI chan-
nel.
F BANK MSB/LSB
Determines the number of the Bank Select MSB and LSB for
each MIDI channel. You can specify a specific Voice by set-
ting the Bank Select MSB, LSB and Program Change (Voice
number).
G [F4] PRE.KIT
This menu appears only when the cursor is located on any of
the VCE NUM, BANK MSB, and BANK LSB settings of
channel 10. Pressing this button calls up the Bank Select MSB
and LSB values corresponding to the Preset Drum Kit of the
DTXTREME III.
H [F4] USR.KIT
This menu appears only when the cursor is located on any of
the VCE NUM, BANK MSB, and BANK LSB settings of
channel 10. Pressing this button calls up the Bank Select MSB
and LSB values corresponding to the User Drum Kit of the
DTXTREME III.
I [F4] EXT.KIT
This menu appears only when the cursor is located on any of
the VCE NUM, BANK MSB, and BANK LSB settings of
channel 10. Pressing this button calls up the Bank Select MSB
and LSB values corresponding to the External Drum Kit of
the DTXTREME III.
The third page of the Voice Job
J FILTER
Determines the value of the Brightness (Control Change num-
ber 74) for each MIDI channel.
K REV SEND (Reverb Send)
Determines the value of the Reverb Send Level (Control
Change number 91) for each MIDI channel.
L CHO SEND (Chorus Send)
Determines the value of the Chorus Send Level (Control
Change number 93) for each MIDI channel.
Voice Job
[SF4] VOICE
NOTE
•Keep in mind that the pressing the [ENTER/STORE] button (executing the
Job) is not necessary for the Voice Job.
Settings Off, All, PC
Range 0 – 127
Range 0 – 127
2
1
4
3
6
5
7 8 9
Range 1 – 128
Range 0 – 127
NOTE
• If you set the Bank Select for MIDI channel 10 to 125 or 127, the Pro-
gram Change number (Drum Kit number) set for MIDI channel 10 will
be automatically applied to ALL other MIDI channels for the internal
tone generator.
Range 0 – 127
Range 0 – 127
Range 0 – 127
K
J
L