Filter
Top Products
Playing Along With a Song
Quick Guide
DTXTREME III Owner’s Manual
37
Quick Guide
From the Song Play display, you can change the Song playback position by following the
operations below.
1 MEAS (Measure)
Indicates the current position of the Song.
1
Move the cursor to MEAS (Measure).
2
Move forward or backward through the measures by using the
[INC/YES], [DEC/NO] buttons and the data dial.
You can set repeated Song playback (the Song plays from beginning to end and repeats).
When “ ” is selected, the Song plays from beginning to end and stops automatically.
B Repeat
Fast Forward/Rewind
1
NOTE
• When the cursor is located at
MEAS, the NUM icon is shown at
the menu corresponding to the
[SF6] button. In this condition, you
can use the [SF1] – [SF5] and
[F1] – [F5] buttons as number but-
tons by pressing the [SF6] NUM
button. For details, see page 14.
Repeat Playback
NOTE
• The Song Repeat setting on the
[F1] PLAY display is temporary
and cannot be maintained as
data. If you want to apply the
Repeat setting to the Song data,
set the Repeat parameter in the
display called up via [SONG] →
[F2] JOB → [SF1] SONG → “03:
Song Name, Tempo, Repeat.”
• Preset Songs and User Songs
include the Repeat setting. This is
why the Repeat setting shown on
the [F1] PLAY display is changed
when a certain Preset Song or
User Song is selected. On the
other hand, SMF Songs (EXT: 01
– 99) on the USB storage device
include no Repeat setting. This is
why the Repeat setting shown on
the [F1] PLAY display is main-
tained even when a certain SMF
Song is selected.
Settings
(Normal playback)
(Repeated playback)
2