Filter
Top Products
Setting Up
DTXTREME III Owner’s Manual
23
■ Precautions when using the USB TO
HOST terminal
When connecting the computer to the USB TO HOST
terminal, make sure to observe the following points.
Failing to do so risks freezing the computer and cor-
rupting or losing the data. If the computer or the instru-
ment freezes, restart the application software or the
computer OS, or turn the power to the instrument off
then on again.
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the USB TO HOST terminal,
exit from any power-saving mode of the computer (such as sus-
pended, sleep, standby).
• Before turning on the power to the instrument, connect the com-
puter to the USB TO HOST terminal.
•Execute the following before turning the power to the instrument
on/off or plugging/unplugging the USB cable to/from the USB TO
HOST terminal.
• Quit any open application software on the computer.
• Make sure that data is not being transmitted from the instru-
ment. (Data is transmitted only by playing pads or playing back
a Song.)
• While a USB device is connected to the instrument, you should
wait for six seconds or more between these operations: (1) when
turning the power of the instrument off then on again, or (2) when
alternately connecting/disconnecting the USB cable.
CAUTION