Filter
Top Products
Quick Guide
Quick Guide
54
DTXTREME III Owner’s Manual
Saving the Created Data to a USB Storage Device
The File mode provides tools for transferring data between the instrument and the USB stor-
age device connected to the USB TO DEVICE connector. This section describes how to save
all the data (including Drum Kit, Drum Voice, Song, and Trigger Setup, etc.) to a USB stor-
age device as a single file and load it from the device to the instrument.
File/Folder Selection
The illustrations and instructions below show you how to select files and folders on the USB storage devices within the File
mode.
NOTE
•For details about USB storage
devices, see 21.
Select the File Type (page 113) from the TYPE column, then
press the Cursor [M] button to move the cursor to the File/
Directory box at the right section in the display.
Select the directory or file by using the [INC/DEC],
[DEC/NO], Cursor [B]/[V] buttons and data dial.
To return to the next
highest level, press the
[EXIT] button.
To go to the next lowest
level, highlight the desired
folder and press the
[ENTER/STORE] button.