Filter
Top Products
Click Mode [CLICK]
Reference
106
DTXTREME III Owner’s Manual
Click Voice Settings [F2] VOICE
From this display (available only when the Click Voice is set to “User Voice”), you can set a different Click Voice for each
beat timing.
1 Voice category
Determines the voice category for the click sound.
B Voice number
Determines the voice number for the click sound. If the voice
number is set to “000,” the indication “no assign” is shown for
the voice name and no sound will be produced.
C TUNING
Determines the pitch of the Voice specified at 2.
Tap Tempo function [F3] TAP
The Tap Tempo function is described in the Quick Guide section on page 34.
Groove Check Function [F4] GROOVE
Explanations about this display are described in the Quick
Guide section on page 51.
Explanations about this display are described in the Quick
Guide section on page 52.
Explanations about this display are described in the Quick
Guide section on page 50.
Settings
kick1 – 2, snare1 – 3, tom1 – 2, cymbal,
hihat, perc1 – 2, efct1 – 2, USR-A – H
2 31
Settings Refer to the separate Data List booklet.
NOTE
• The amount of Voices differs depending on the selected Voice cate-
gory.
Range
-24.00 – +24.00 (1.0 indicates one semi-
tone.)
NOTE
•A User Voice assigned to a Click Voice will be played back with just
one shot, even if the User Voice is set to “loop” in the Sampling mode.
• When you want to use the Click Voice having a User Voice, it is a
good idea to save the file including your desired User Voice in the
AUTOLOAD folder (page 125) of the USB storage device and use the
Auto Load function (page 125).
Performing the Groove Check
[SF1] G.CHECK
Performing the Rhythm Gate
[SF2] R.GATE
Parameter Settings for the Groove
Check and Rhythm Gate
[SF3] SETTING
Reference
Drum Kit mode Song mode Click mode Tr igger mode File mode Utility mode Chain mode Sampling mode