Filter
Top Products
Saving the Created Data to a USB Storage Device
Quick Guide
DTXTREME III Owner’s Manual
55
Quick Guide
Saving the Created Data to a USB Storage Device
The Save operation can be done via various methods, such as saving all data as a single file or saving a specified type of data
(e.g., only Drum Kits) as a single file. This section describes instructions on saving all the data you created in each mode of
the DTXTREME III to a USB storage device as a single file.
After connecting the USB storage device, follow the instructions below.
1
Press the [FILE] button to enter the File mode.
2
Press the [F1] SAVE button to call up the Save display.
3
Move the cursor to the TYPE parameter, then set the File type to
“AllData” by using the data dial or the [INC/YES] and [DEC/NO]
buttons.
4
Move the cursor to the file name input location, then input a file
name.
For detailed instructions on naming, refer to page 15 in the Basic Operation section.
You can call up a convenient character list for easier name entry by pressing the
[SF6] button.
5
Press the Cursor [MM
MM
] button to move the cursor to the file/direc-
tory select box, then select a destination directory.
This step is necessary if you have created a directory as destination on the USB stor-
age device. This is step is not necessary if you want to save the file to the root direc-
tory.
6
Press the [SF1] EXEC to execute the Save operation.
If you are about to overwrite an existing file, the display prompts you for confirma-
tion. Press the [INC/YES] button to execute the Save operation to overwrite the exist-
ing file, or press the [DEC/NO] button to cancel it, then enter the file name again.
After the data has been saved, a “Completed” message appears and operation returns
to the original display.
NOTE
• If you want to call up a sub direc-
tory, move the cursor to the
desired directory then press the
[ENTER/STORE] button.
While the data is being saved, make sure to follow these precautions:
•Never remove or eject the media from the device (USB storage).
•Never unplug or disconnect any of the devices.
•Never turn off the power of the DTXTREME III or the relevant devices.
CAUTION