Filter
Top Products
File Mode [FILE]
Reference
116
DTXTREME III Owner’s Manual
Loading a File [F2] LOAD
1
Press the [FILE] button to enter the File
mode, then press the [F2] LOAD button to
call up the Load display.
1 TYPE
Among the various types of data saved in a single file on a
USB storage device, you can load all of them at once or load
only a specific type of data to this instrument. This parameter
determines which specific type of data will be loaded from a
single file.
2
Move the cursor to TYPE, then set the
desired File type to one of the following:
“AllData,” “AllTrigger,” “AllKit,” “AllChain,”
“AllSong,” or “AllVoice.”
Only available files according to the Type are listed in the
Directory/File list box on the display.
3
Move the cursor to the Directory/File list
box, then select the file to be loaded.
You can select any of the files listed in the Directory/File list
box on the display.
4
Press the [SF1] EXEC button to execute
the Load operation.
• The Load operation overwrites any data previously existing in the des-
tination internal memory. Important data should always be saved to a
USB storage device connected to the USB TO DEVICE terminal.
While the data is being loaded, make sure to follow these precautions:
•Never remove or eject the media from the device (USB storage).
•Never unplug or disconnect any of the devices.
•Never turn off the power of the DTXTREME III or the relevant devices.
Loading All User Data or All Data of
a Specific Type
Settings
AllData, Utility, Click, AllTrigger, Trigger,
AllKit, Kit, AllChain, Chain, AllSong, Song,
AllVoice, Voice, Wave
CAUTION
CAUTION
1
Reference
Drum Kit mode Song mode Click mode Trigger mode File mode Utility mode Chain mode Sampling mode