Filter
Top Products
Drum Kit Mode [DRUM KIT]
Reference
82
DTXTREME III Owner’s Manual
From this display, you can set the EQ related parameters
and the Tone related parameters such as attack and release.
This display consists of two pages, which can be called up
via the Cursor [N] and [M] buttons.
The first page when the INPUT display is called up:
The first page when the SOURCE display is called up:
The first page when the SOURCE display is called up
and “MIDI” is selected:
1 Low Frequency
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
center frequency of the low EQ band that is attenuated/
boosted for each selected Trigger Input Jack. When the
SOURCE display is called up, this parameter determines the
center frequency of the low EQ band that is attenuated/
boosted for each selected Trigger Input Source.
B Low Gain
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
amount of boost or attenuation applied to the low EQ band for
each selected Trigger Input Jack. When the SOURCE display
is called up, this parameter determines the amount of boost or
attenuation applied to the low EQ band for each selected Trig-
ger Input Source.
C Mid Frequency
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
center frequency of the middle EQ band that is attenuated/
boosted for each selected Trigger Input Jack. When the
SOURCE display is called up, this parameter determines the
center frequency of the middle EQ band that is attenuated/
boosted for each selected Trigger Input Source.
D Mid Gain
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
amount of boost or attenuation applied to the middle EQ band
for each selected Trigger Input Jack. When the SOURCE dis-
play is called up, this parameter determines the amount of
boost or attenuation applied to the middle EQ band for each
selected Trigger Input Source.
E MID Q
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
frequency bandwidth of the middle EQ band for each selected
Trigger Input Jack. When the SOURCE display is called up,
this parameter determines the frequency bandwidth of the
middle EQ band for each selected Trigger Input Source.
F High Frequency
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
center frequency of the high EQ band that is attenuated/
boosted for each selected Trigger Input Jack. When the
SOURCE display is called up, this parameter determines the
center frequency of the high EQ band that is attenuated/
boosted for each selected Trigger Input Source.
G High Gain
When the INPUT display is called up, this parameter (for
which the value is indicated in the knob icon) determines the
amount of boost or attenuation applied to the high EQ band
for each selected Trigger Input Jack. When the SOURCE dis-
play is called up, this parameter determines the amount of
boost or attenuation applied to the high EQ band for each
selected Trigger Input Source.
H PAGE >
This appears when another page can be called up from the
current page. Use the Cursor [
M] or [N] button to call up
another page.
Setting EQ- and Tone-related
Parameters
[SF3] EQ-TONE
Range 50.1 – 2.00k
Range -32 – +32
8
7621 43 5
8
1 3 55 6
2 4 7
8
1 3 55 6
2 4 7
Range 139.7 – 10.1k
Range -32 – +32
Range 0 – 31
Range 503.8 – 14.0k
Range -32 – +32
Reference
Drum Kit mode Song mode Click mode Trigger mode File mode Utility mode Chain mode Sampling mode