Filter
Top Products
Style Creator
Style Creator
134 Reference
Style Editing (Full Edit)
This section explains various parameters, other than the basic ones.
The explanations here apply to step #5 of the Basic Procedure on page 128.
■ Setup
● Voice
This function can be used to change the voices assigned to any of the current style’s parts.
While the SETUP display is selected, all other available parameters can be modified as
required via the MIXING CONSOLE displays.
● Setup Copy
Instead of starting with all the sections and/or parts from the selected original style, you can
copy specific parts from other sections/parts of the same style, or from other styles as
required.
■ Edit
• Quantize ........................... Refer to page 114.
• Velocity Change ................ Boosts or cuts the velocity of all notes in the specified part by the specified per-
centage.
• Measure Copy................... This function allows data to be copied from one measure or group of measures
to another location within the same part.
Use the TOP and LAST LCD buttons to specify the first and last measures in
the region to be copied. Use the DEST LCD button to specify the top of the
measure to which the data is to be copied.
If the copy destination falls outside the number of measures actually in the
part, the corresponding source measures will not be copied.
• Measure Clear .................. This function clears all data from the specified range of measures within the
specified part. Use the TOP and LAST LCD buttons to specify the first and last
measures in the range to be cleared.
• Remove Control Event...... This function can be used to remove all occurrences of a specified type of con-
trol event from a specified part. Use the EVENT LCD buttons to select the type
of event to be removed.
• Remove Duplicate Notes .. Removes all duplicate notes from a specified part.
Select the desired menu.
Select the desired menu.
132