Yamaha 9000 Pro Electronic Keyboard User Manual


 
Using the Optional Plug-in Board
42
Using the Optional Plug-in Board
Installing an optional Plug-in Board to the 9000Pro lets you greatly expand the sonic palette of the instru-
ment. Once you've installed an optional Plug-in Board to the 9000Pro, you have instant access to a whole
new set of amazing, dynamic voices, in addition to the built-in voices of the 9000Pro.
Playing a Plug-in Voice
1 Install the Optional Plug-in Board to the 9000Pro.
See page 180 for installation instructions.
In this example, a PLG150-VL Virtual Acoustic Plug-in Board has
been installed to SLOT 1. The PLG150-VL lets you expand the sonic
palette of your 9000Pro by adding 256 dynamic VL voices (including
137 VL-XG voices), created with the unique Virtual Acoustic Synthe-
sis system.
2 After you've installed the Plug-in Boards, turn the power ON.
When turning the power ON for the first time after installing the board, a mes-
sage appears indicating that the board settings are being initialized, followed
after a while by the main display.
Note that it takes a short amount of time before the main display appears, espe-
cially if two boards have been installed. If an error message appears, check that
the board or boards have been properly installed to the 9000Pro.
3 After the main display appears, insert the "Plug-in Custom
Voice" disk supplied with the 9000Pro and load the le
"150VL CsVce.xvc" to the 9000Pro via the Plug-in Manager
function. See page 66 for details.
4 Press the [R1] LCD button to turn the RIGHT1 part on.
Plug-in Voice related
buttons
Up to two boards can be
installed to the bottom
panel.
Reference
on page 64
PLG150-VL
F
G
H
I
J
RIGHT3RIGHT2
UPPER
LEFTLEFT HOLD
LOWER
RIGHT1
PART ON
/
OFF
PART SELECT
40