Support User Manuals

Yamaha 9000 Pro Electronic Keyboard User Manual

Open as PDF

of 250

Sampling

Sampling

Reference 87

■ Pre Effect

You can set up a maximum of three DSP effects to be applied to the source sound as it

is sampled. The DSP blocks are connected in series as shown below. The following dis-

play will be shown in step #10 on page 40.

Importing Wave Files from Disk

To import previously saved waveform ﬁles via the PSR-8000 or standard WAV or AIFF

format ﬁles from disk, insert the appropriate disk into the 9000Pro ﬂoppy disk drive,

then press the [FILE IMPORT] LCD button in step #3 in "Basic Procedure" on page

86.

Clearing Wave Data

The explanations here apply to step #4 of the Basic Procedure on page 86.

Change the balance between the

direct (dry) and effect (wet) sound.

Select the desired

DSP block.

Select the desired

type of the selected

DSP block.

Select the parameter and adjust the

value of the selected parameter.

Note that the contents of the parameter

may be different depending on the

selected DSP type.

Select this to call up the

storing display.

Press this button to

switch between the cur-

rently selected wave and

the currently selected

panel voice.

Select this and press the

[NEXT] button to call up the

display that imports the

wave data sampled via the

PSR-8000.

Select this and press the

[NEXT] button to call up the

display that imports the

WAV or AIFF format ﬁle.

Select this to execute the

Clear operation.

Press this button to switch

between the currently

selected wave and the cur-

rently selected panel voice.

85

previous next