Yamaha 9000 Pro Electronic Keyboard User Manual


 
Vocal Harmony
Vocal Harmony
Reference 81
Selecting/Producing the Vocal Harmony effect
Vocal Harmony Parameters
Basic Procedure
Chordal Type/Vocoder Type Determines how the harmony notes are applied.
Harmony Gender Type Can be set to Off or Auto. When Auto, the gender of the harmony sound is changed automati-
cally.
Lead Gender Type Determines whether and how the gender of the lead vocal sound (i.e., the direct microphone
sound) will be changed. When Off no gender change occurs. When Unison, Male or Female
is selected the corresponding gender change is applied to the lead vocal. (In this case the number
of harmony notes which can be produced in addition to the lead vocal is reduced to one.)
Lead Gender Depth Adjusts the degree of lead vocal gender change produced when one of the Lead Gender Types
(above) is selected.
Lead Pitch Correction When Correct is selected the pitch of the lead vocal is shifted in precise semitone steps. This
parameter is only effective when one of the Lead Gender Types is selected.
Auto Upper Gender Threshold Gender change will occur when the harmony pitch reaches or exceeds the specified number of
semitones above the lead vocal pitch.
Auto Lower Gender Threshold Gender change will occur when the harmony pitch reaches or exceeds the specified number of
semitones below the lead vocal pitch.
Upper Gender Depth Adjusts the degree of gender change applied to harmony notes higher than the Auto Upper Gender
Threshold.
Lower Gender Depth Adjusts the degree of gender change applied to harmony notes lower than the Auto Lower Gender
Threshold.
Vibrato Depth Sets the depth of vibrato applied to the harmony sound. Also affects the lead vocal sound if a Lead
Gender Type is selected.
Vibrato Rate Sets the speed of the vibrato effect.
Vibrato Delay Specifies the length of the delay before the vibrato effect begins when a note is produced.
Harmony1 Volume Sets the volume of the first harmony note.
Harmony2 Volume Sets the volume of the second harmony note.
Harmony3 Volume Sets the volume of the third harmony note.
Harmony1 Pan Specifies the stereo (pan) position of the first harmony note. When Random is selected the ste-
reo position of the sound will change randomly whenever the keyboard is played.
Harmony2 Pan Specifies the stereo (pan) position of the second harmony note. When Random is selected the
stereo position of the sound will change randomly whenever the keyboard is played.
Harmony3 Pan Specifies the stereo (pan) position of the third harmony note. When Random is selected the ste-
reo position of the sound will change randomly whenever the keyboard is played.
Harmony1 Detune Detunes the first harmony note by the specified number of cents.
Harmony2 Detune Detunes the second harmony note by the specified number of cents.
Harmony3 Detune Detunes the third harmony note by the specified number of cents.
Pitch to Note When ON the lead vocal sound plays the 9000Pro tone generator system. (However, dynamic
changes in the vocal sound do not affect the volume of the tone generator.)
Pitch to Note Part Determines which of the 9000Pro parts will be controlled by the lead vocal when the Pitch to Note
parameter is ON.
1 Press the VOCAL HAR-
MONY [SELECT] button.
2Select a Vocal
Harmony type.
3 Edit the desired Vocal Harmony
parameters.
4Store your
settings.
79