Filter
Top Products
Display-based Controls
44 Basic Operation
Basic Operation
Display-based Controls
As you’ve seen in “Quick Guide” above, the 9000Pro features an exceptionally large and easy-to-
understand display. It provides comprehensive at-a-glance information on all current settings, and
gives you convenient, intuitive control over the 9000Pro’s functions.
● LCD buttons
The LCD (A~J) buttons are used to select the corresponding menu. In the example display
shown above, for example, the LCD [F] button can be used to turn the R1 voice on.
The LCD (1~8) buttons are divided into eight sets of up/down buttons, and are used to make
selections or adjust settings (up or down correspondingly) for functions shown directly above
them. In the example display shown above, for example, the LCD [6] buttons can be used to
adjust the volume of the R2 voice.
● Data dial
This is usually used to change the tempo of accompaniment/song playback (when the
TEMPO lamp is lit). However, when certain functions (for example, Music Database selection,
Naming and Mixing Console adjusting) are shown on the LCD display, this dial is used to
change the corresponding data values (when the DATA ENTRY lamp is lit).
Depending on the selected display, the lamps switch between each other automatically. (This
cannot be changed manually.)
Rotating the data dial to the right (clockwise) increases the value, while rotating it to the left
(counter-clockwise) decreases it.
● PAGE CONTROL buttons
If you’ve selected several different functions’ displays in succession, you can “retrace your
steps” and revisit each display by using the [BACK] and [NEXT] buttons.
Pressing [NEXT] button go to the next available page and pressing the [BACK] button return
to the previous available page.
● The [LCD CONTRAST] Control
The 9000Pro display panel is a liquid-crystal type which features an [LCD CONTRAST] con-
trol. Use the [LCD CONTRAST] control to set the display for optimum legibility.
● [EXIT] button
No matter where you are in the 9000Pro display hierarchy, the [EXIT] button will return you to
the next highest level, or to the normal play mode display.
Since the 9000Pro has so many different displays, you may occasionally find yourself con-
fused as to which operation’s display is currently shown. If this happens, you can return to
“home base” by pressing the [EXIT] button several times. This returns the 9000Pro to the
default display — the same display that appears when the power is turned on.
● [MAIN MIXER] button and [PART ON/OFF] button
Refer to pages 24, 25 and 31.
MAIN
MIXER
PART
ON
/
OFF
PART
NEXTBACK
PAGE CONTROL
DIRECT
ACCESS
EXIT
TEMPO
DATA
ENTRY
12345678
A
B
C
D
E
F
G
H
I
J
BEAT
LCD
CONTRAST
LCD buttons
LCD buttons
LCD buttons
Data dial
42