Yamaha 9000 Pro Electronic Keyboard User Manual


 
Installing Optional Hardware
Installing Optional Hardware
182 Reference
5 Turn over the Plug-in board/Hard disk cover.
6 Attach the Plug-in Board to the Plug-in board stand. ...........................
6-[1] Remove the four screws from the Plug-in stand with a Phillips
screwdriver. Do not remove the other screws.
6-[2] Attach the Plug-in board to the Plug-in board stand using the four
screws removed in the previous step (6-[1]).
If you are installing a second board, go on to step #7 below. If you are installing only
one board, go on to step #8.
7
As required, attach another Plug-in board to the Plug-in board stand
. ....
7-[1] Remove the four screws from the Plug-in stand and remove the
Plug-in stand from the cover. Do not remove the other screws.
7-[2] Attach another Plug-in board by turning over the Plug-in board stand
and using the same operations in steps 6-[1] and 6-[2].
When turning over the board, let it rest on a soft surface.
7-[3] Attach the Plug-in board stand to the Plug-in board/Hard disk cover with
the four screws removed in step 7-[1].
This is the location for the Hard disk
unit. See page 184.
Plug-in board stand
Plug-in board/Hard disk cover
First board
Gold color screws
Plug-in board
Gold color screws
Plug-in board connector
Second board
Gold color screws
Gold color screws
Plug-in board stand
Gold color screws
Plug-in Board (rst board)
Plug-in Board (second board)
Plug-in board/Hard disk cover
180