Filter
Top Products
Chapter 10: Using Effects
232 ANDROMEDA A6 REFERENCE MANUAL
Table of Digital Effects Parameters (continued)
CONFIG DISPLAY
PARAMETER
NAME
MOD
PAGE
DISPLAY
PARAMETER NAME RANGE
Plate + Hall
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
BLEND Input Blend ±100.00
PL OUT Room Output Level 0 - 100%
HL OUT Hall Output Level 0 - 100%
PLATE1 DECAY Plate Reverb Decay Time 567 msec - 61.6 sec
LSHELF Low Frequency Shelf 0 - 255
HPF Input High-Pass Filter off, 29Hz - 41.3KHz
LPF Input Low-Pass Filter off, 29Hz - 41.3KHz
DENS Reverb Density 0 - 100%
DIFF Reverb Diffusion 0 - 100%
PLATE2 PDTIME Pre-Delay Time 0 - 250 msec
PDMIX Pre-Delay Mix 0 - 100%
LDAMP Low Frequency Damping off, 29Hz - 41.3KHz
HDAMP High Frequency Damping off, 29Hz - 41.3KHz
HALL1 DECAY Hall Reverb Decay Time 1.97 - 135 sec
BOOST Hall Bass Boost 0 - 255
BFREQ Hall Bass Boost Frequency off, 29Hz - 41.3KHz
LPF Hall Input Low-Pass Filter off, 29Hz - 41.3KHz
HALL2 DENS Reverb Density 0 - 100%
DIFF Reverb Diffusion 0 - 100%
PDTIME Pre-Delay Time 0 - 250 msec
PDMIX Pre-Delay Mix 0 - 100%
Nonlinear
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
OUT Effects Output Level 0 - 100%
PARAM1 TIME Nonlinear Reverb Time 100 - 600 msec
LPF Input Low Pass Filter off, 29Hz - 41.3KHz
PDTIME Pre-Delay Time 0 - 250 msec
PDMIX Pre-Delay Mix 0 - 100%
PARAM2 DIR Reverb Direction FORWARD, REVERSE
DENS Reverb Density 0 – 100%
DIFF Reverb Diffusion 0 – 100%